Fabory low hex nut plain steel thread choice
Brand : Fabory
Condition : New
Model : M10x1 left-hand or M20x1.5 right-hand, depending on version
Product : One low nut in plain steel
These two Fabory versions are low hex nuts in plain, uncoated steel with fine metric threads. The M10 version has a 1 mm pitch and a left-hand thread; the M20 version has a 1.5 mm pitch and a right-hand thread. Your selection defines all three parameters: diameter, pitch and direction.
The M10 version is 5 mm high and takes a 17 mm spanner. The M20 version is 10 mm high and takes a 30 mm spanner. Fabory specifies DIN 439-2, ISO 8675 and class 040, the 04 designation for low nuts. Their reduced load capacity must be considered in the fastening design.
The low profile may allow use as a jam nut where the assembly design permits. Check the exact bolt or stud thread, seating, usable length, tool access and tightening requirements. No vehicle application, tightening torque or universal compatibility is claimed.
The price is for one nut in the selected version, without a bolt or additional pack. The three views are original Fabory family illustrations, rather than photographs of the delivered item; the manufacturer watermark is retained. They do not establish the diameter, pitch or thread direction.
-
Brand
-
ReferenceSASO136DAAF49255
-
In stock25 Items