Cat Cams camshaft for Renault F2 / F3 1.7 8V engine
Brand : Cat Cams
Condition : New
Model : Renault F2 / F3 1.7 8V
Product : Camshaft
Product customization
For Renault F2 / F3 1.7 8 valve SOHC engines. The manufacturer requires the full engine code and year, original camshaft markings, base circle and cam height, and shim type. Original base circle: 33 or 36 mm; shims 31.5 mm centred on the outside or 35 mm centred on the inside. Complete the four required fields before ordering. Profile C is for a turbo conversion. The engine builder must validate the exact configuration and modifications before ordering.
| Profile | Duration at 0.1 mm intake / exhaust | Duration at 1 mm intake / exhaust | Valve lift intake / exhaust | Lift at TDC intake / exhaust |
|---|---|---|---|---|
| Profile A | 280 / 280° | 244 / 244° | 10.65 / 10.65 mm | 2.50 / 2.50 mm |
| Profile B | 257 / 257° | 221 / 221° | 10.30 / 10.30 mm | 1.35 / 1.25 mm |
| Profile C | 257 / 257° | 221 / 221° | 10.30 / 10.30 mm | 0.95 / 0.90 mm |
| Profile D | 293 / 293° | 246 / 246° | 12.00 / 12.00 mm | 3.15 / 3.10 mm |
| Profile E | 301 / 301° | 254 / 254° | 12.50 / 12.50 mm | 3.95 / 3.90 mm |
| Profile F | 305 / 305° | 262 / 262° | 13.00 / 13.00 mm | 4.70 / 4.70 mm |
| Profile G | 317 / 317° | 270 / 270° | 13.50 / 13.50 mm | 5.25 / 5.20 mm |
Profile A : Manufacturer setup to check: followers original, springs original, upper retainers original.
Profile B : Manufacturer setup to check: followers original, springs original, upper retainers original.
Profile C : Manufacturer setup to check: followers original, springs original, upper retainers original.
Profile D : Manufacturer setup to check: followers specific, springs specific, upper retainers original. Competition applications only. Independent engine management with a throttle position sensor or carburettors is required. Specific followers and shims are required, with a 35 mm effective follower contact surface.
Profile E : Manufacturer setup to check: followers specific, springs specific, upper retainers original. Competition applications only. Independent engine management with a throttle position sensor or carburettors is required. Specific followers and shims are required, with a 35 mm effective follower contact surface.
Profile F : Manufacturer setup to check: followers specific, springs specific, upper retainers original. Competition applications only. Independent engine management with a throttle position sensor or carburettors is required. Specific followers and shims are required, with a 35 mm effective follower contact surface.
Profile G : Manufacturer setup to check: followers specific, springs specific, upper retainers original. Competition applications only. Independent engine management with a throttle position sensor or carburettors is required. Specific followers and shims are required, with a 35 mm effective follower contact surface.
camshafts must turn freely in the head, with machining where necessary; at least 0.6 mm between valve seal and retainer at full lift; at least 1 mm of remaining spring travel; at least 1 mm valve to piston clearance, preferably 1.5 mm. Check 5 to 15° before TDC on the exhaust and after TDC on the intake.
Associated valve train components are not stated as included with the camshaft.
The figures and restrictions below are provided by the manufacturer. A professional must install and time the camshafts after checking the valve train, clearances, springs and engine management compatibility. Performance preparation part, with no claimed power gain or road approval. Manufacturer information for original springs and components does not replace mechanical checks. Image for reference only; no additional accessories are specified.
-
Brand
-
ReferenceSASAC0011-A
-
VehiclesRenault F2 / F3 1.7 8V