MOTUL 5W30 300V Power engine oil 2L

MOTUL’s reputation in the field of high-performance ester-based synthetic lubricants is now recognised worldwide. The new Motul 300V series incorporates the latest developments in exclusive ESTER Core® technology to maximise engine power while ensuring reliability and wear protection. This Racing formula is now compatible with all fuel types, including bioethanol (E85), particulate filters, and engines using LPSI (Low Speed Pre Ignition) technology.

ESTER Core® technology offers optimised polarity for maximum oil film adhesion, increasing engine protection even in the most extreme conditions. Specific to the 300V range, this technology offers numerous advantages:

• Increased power through reduced friction for optimum torque and power at all engine speeds.
• Enhanced reliability with high shear stability, ensuring maximum oil film strength and reduced engine wear.
• Extended service life through increased oxidation resistance, ensuring greater longevity for the engine and oil.
• Improved responsiveness with maximum polar adhesion of the oil film for rapid increases in engine speed.
• Easier starting through a rapid increase in oil pressure and flow.
• Reduced oil consumption through low oil volatility and evaporation, allowing better consumption control.
• Good detergency to maintain engine cleanliness.

Specifications:

• Viscosity grade SAE J 300 5W-30
• Density at 20°C (68°F) ASTM D1298: 0.850
• Viscosity at 40°C (104°F) ASTM D445 : 64.2 mm²/s
• Viscosity at 100°C (212°F) ASTM D445: 11.1 mm²/s
• HTHS viscosity at 150°C (302°F) ASTM D4741: 3.5 mPa.s
• Viscosity index ASTM D2270: 165
• Pour point ASTM D97: -48°C / -54°F
• Flash point ASTM D92 : 228°C / 442°F
• TBN ASTM D2896 : 7.7 mg KOH/g
• 2L container