View category: Vehicle parts

4 forged I-beam connecting rods for 306 S16 and Xsara VTS 167PS short-rod configuration

Reference AXBIE009I

Brand: XTREM MOTORSPORT

Condition: New

Product: 4 forged I-beam connecting rods for 306 S16 and Xsara VTS 167PS short-rod configuration

Price: €989.90
Tax included
Product availability: Restocking: contact us
Secure payment
Delivery & lead times

Shipping costs and available delivery methods are calculated from your address during checkout.

 

Discover our set of 4 XTREM forged I-beam connecting rods, specially designed for 306 S16 and Xsara VTS 167PS models with a short-rod configuration. XTREM Motorsport rods are carefully balanced to within a gram and designed to withstand engine speeds above 9000 rpm. These racing rods stand out for their light weight and strength, making them a preferred choice for many racing engines. They are ideal for highly tuned engines capable of producing more than 1,5 times their original power.

Made from high-quality, heat-treated steel, XTREM Motorsport rods provide uncompromising performance. Their lightweight design saves up to 100 grams per rod, allowing the engine to release its full power at high rpm. The kit includes ARP L19 bolts and washers, even stronger than the recommended ARP 2000 models. (Tightening stages detailed below)

Kit specifications:

  • Engine code: XU10J4RS
  • Centre-to-centre length: 158.00mm
  • Big-end diameter: 53.69mm
  • Big-end width: 24.25mm
  • Pin diameter: 20.00mm
  • Small-end width: 19.15mm
  • Individual connecting rod weight: 567g
  • Bolts: ARP L19 3/8 thread

Applications:

  • CITROËN Xsara Coupé (1997-06 to 2004-10) Petrol 2.0 16V 167PS FWD Short connecting rod configuration
  • CITROËN ZX 3/5 doors (1996-05 to 1997-06) Petrol 2.0 16V 167PS FWD Short connecting rod configuration
  • PEUGEOT 306 3/5 doors (1996-07 to 2001-05) Petrol 2.0 16V 167PS FWD Short connecting rod configuration

Warning: ARP L19 fasteners are susceptible to corrosion and require precautions in use. When tightening connecting rod bolts, lubricate the thread and seating surface with molybdenum paste. Tighten progressively in three stages to reach the recommended stretch (between 150 and 170 microns, i.e. 0,15 / 0,17 mm). ARP L19 3/8" tightening stages:

  1. Tightening stage at 2.5 m.kgf
  2. Tightening stage at 4.5 m.kgf
  3. Tightening stage at 6.5 m.kgf

4 other products in the same category

Loading...
Back to top