COILOVERS BC Racing BR-RA / Renault Clio 3 RS Phase 1

BC Racing BR-RA coilovers for Renault Clio 3 RS Phase 1

This BC Racing BR-RA coilover kit is designed for Renault Clio 3 RS Phase 1 from 2006 to 2009 with large front top mounts. Sold as a set of 4, it effectively improves the Clio RS's handling, for spirited road driving as well as circuit outings or track days.

Developed through BC Racing's motorsport experience, the Club Sport BR series offers an excellent balance of performance, driving precision and versatility. The BR-RA version features spherical-bearing front top mounts, ideal for enhancing front-end precision and steering feedback.

Purpose of the part

Coilovers replace the original dampers and springs to control body movement, the vehicle's stance and ride height. They play an essential role in handling, braking stability, corner-exit traction and steering precision.

Their threaded bodies allow BC Racing coilovers to adjust vehicle height without changing spring preload or unnecessarily reducing travel. The 30-position damping adjustment adapts suspension behaviour to the intended use: road, spirited driving, track or a firmer setup.

Symptoms or consequences of worn or unsuitable suspension

• Reduced roadholding and loss of cornering precision.
• Excessive body movement under braking, acceleration or cornering load.
• Worn dampers causing bouncing, instability or longer braking distances.
• Uneven tyre wear caused by poor suspension control.
• Insufficient support during spirited driving or track use.
• Ride height unsuitable for chassis preparation or performance use.

Benefits of replacement

• Noticeably improved handling and stability of the Clio 3 RS.
• Precise ride-height adjustment to optimise the vehicle's stance.
• 30-position damping adjustment to adapt the suspension to your driving.
• Greater front-end precision thanks to the BR-RA version's spherical-bearing front top mounts.
• More controlled handling during spirited driving and on track.
• Versatile solution retaining an acceptable level of comfort for road use.
• High-performance monotube construction for a fast, consistent response.

Specifications

• Brand: BC Racing.
• Product: BR-RA coilovers.
• Series: Club Sport BR.
• Condition: new product.
• Sold as a set of 4: complete front and rear kit.
• Pressurised monotube construction with a floating piston.
• 46 mm piston inside a 53 mm body for optimised oil capacity.
• Height adjustment via the lower mount, without changing spring compression.
• 30-position damping adjustment with simultaneous rebound and compression adjustment.
• Spherical-bearing front top mounts for greater driving precision.
• Rubber-bushed rear top mounts where the vehicle configuration allows.
• High-performance oils providing good thermal stability and greater endurance.
• Specific lower bushes ensuring optimum support of the damper body.
• Spring rate stated in Front / Rear order.
• Kit supplied with a pair of adjustment spanners, fitting instructions and warranty card.

Vehicle compatibility

• Renault Clio 3 RS Phase 1.
• Years: 2006 to 2009.
• Version with large front top mounts.
• Engine: Clio 3 Renault Sport 2.0 16V.

Warning: it is essential to check whether your Renault Clio 3 RS has small or large front top mounts before ordering. This kit is for the large-top-mount version.

Conclusion

BC Racing BR-RA coilovers are an ideal solution for transforming the handling of your Renault Clio 3 RS Phase 1 with large top mounts, offering precise adjustment, excellent chassis effectiveness and a design suited to spirited-driving enthusiasts.