Alberi a camme / Cat Cams / Clio 2 Megane 1 1.6L K4M 708

Riferimenti:

5502702 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 234° / 226° / Opening @ 1.0mm: 196° / 187° / Lifting 9.25mm / 8.25mm / 0.45mm / 0.80mm / Lifting TDC / Hydro / Use FIA

Non è necessario modificare le periferiche.

-------

5502703 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 242° / 2234° / Opening @ 1.0mm: 203° / 196° / Lifting 9.50mm / 9.25mm 0.75mm / 1.15mm / Lifting TDC / Hydro / Sport use

Non è necessario modificare le periferiche.

-------

5502704 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 250° / 242° / Opening @ 1.0mm: 211° / 203° / Lifting 9.75mm / 9.50mm 1.05mm / 1.55mm / Lifting TDC / Hydro / Sport use

Non è necessario modificare le periferiche.

-------

5502710 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 270° / 2258° / Opening @ 1.0mm: 232° / 2220° / Lifting 11.30mm / 10.30mm 2.05mm / 1.60mm Lifting TDC / Hydro / Competition use

Cambio obbligatorio delle molle in modelli rinforzati.

-------

5502715 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 268° / 263° / Opening @ 1.0mm: 235° / 226° / Lifting 11.50mm / 10.85mm 2.70mm / 2.30mm Lifting TDC / Hydro / Competition use

Cambio obbligatorio delle molle in modelli rinforzati.

-------

5502716 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 284° / 276° / Opening @ 1.0mm: 250° / 242° / Lifting 11.75mm / 11.55mm 3.35mm / 3.05mm Lifting TDC / Hydro / Competition use

Cambio obbligatorio delle molle in modelli rinforzati.

-------

5502717 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 292° / 284° / Opening @ 1.0mm: 258° / 250° / Lifting 12.00mm / 11.75mm 3.85mm / 3.60mm Lifting TDC / Hydro / Competition use

Cambio obbligatorio delle molle in modelli rinforzati.

-------

5502851 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 288° / 288° / Opening @ 1.0mm: 250° / 250° / Lifting 11.50mm / 11.50mm 3.40mm / 4.05mm Lifting TDC / Hydro / Competition use

Mandatory change of springs and cups with reinforced models as well as mechanical pushers.

-------

5502852 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 296° / 296° / Opening @ 1.0mm: 258° / 258° / Lifting 12.00mm / 12.00mm 3.90mm / 4.55mm Lifting TDC / Hydro / Competition use

Mandatory change of springs and cups with reinforced models as well as mechanical pushers.

-------

5502853 / Vedi PDF per la scheda completa:

Opening @ 0.1mm: 304° / 304° / Opening @ 1.0mm: 266° / 266° / Lifting 12.50mm / 12.50mm 4.45mm / 5.10mm Lifting TDC / Hydro / Competition use

Mandatory change of springs and cups with reinforced models as well as mechanical pushers.