AP Racing 184 mm rigid sintered clutch plate with long hub
Brand : AP Racing
Condition : New
Model : Competition clutch to match assembly and spline
Product : One outer plate with long hub, choice of spline
This rigid AP Racing clutch plate uses a sintered metallic friction lining and a long hub for a 184 mm competition clutch. It is the outer plate of a back-to-back arrangement, distinct from the centre plate. Choose the spline to match the gearbox input shaft and assembly: 1 1/8 inch with 10 splines, 24 mm with 21 splines or 1 inch with 23 splines. Inch sizes are the manufacturer’s nominal dimensions. Nominal new plate thickness is 2.63 mm. Also check hub offset, plate position and the complete clutch geometry; diameter alone does not establish fitment. This family is normally intended for circuit use. The price is for one plate, without a clutch cover assembly, flywheel or additional plate. The manufacturer’s photo is a family illustration and does not establish the spline count of the selected version. No specific vehicle fitment or universal compatibility is stated.
Six additional spline choices join this product: 7/8 inch with 20 teeth, 1.16 inch with 26 teeth, 0.92 inch with 21 teeth, 29 mm with 10 teeth, 21.1 mm with 18 teeth and 22 mm with 26 teeth. These nominal sizes identify the new outer plates with long hubs. Select the exact version for the input shaft and assembly described above.