Cat Cams camshaft for Renault R5 Turbo 840.730 engine
Brand : Cat Cams
Condition : New
Model : Renault R5 Turbo / Maxi Turbo 840.730
Product : Camshaft
For the R5 Turbo and Maxi Turbo 840.730 engine with crossflow head. Manufacturer length 384 mm without water pump drive, double chain; journal diameters 37.94 / 37.94 / 37.94 / 34.48 mm. The manufacturer has no original valve spring information: have the correct spring configuration established before ordering.
| Profile | Duration at 0.1 mm intake / exhaust | Duration at 1 mm intake / exhaust | Valve lift intake / exhaust | Lift at TDC intake / exhaust |
|---|---|---|---|---|
| Profile A | 280 / 280° | 236 / 236° | 10.00 / 10.00 mm | 2.15 / 2.15 mm |
| Profile B | 287 / 287° | 244 / 244° | 10.45 / 10.45 mm | 2.60 / 2.60 mm |
Profile A : Manufacturer exterior spring configuration: not specified; validate before ordering. Engine management remapping is required.
Profile B : Manufacturer exterior spring configuration: not specified; validate before ordering. Competition applications only. Independent engine management with a throttle position sensor or carburettors is required.
Camshafts must turn freely in the head, with machining where necessary; at least 0.6 mm between valve seal and retainer at full lift; at least 1 mm of remaining spring travel; at least 1 mm valve to piston clearance, preferably 1.5 mm. Check 5 to 15° before TDC on the exhaust and after TDC on the intake.
The figures and restrictions below are provided by the manufacturer. A professional must install and time the camshafts after checking the valve train, clearances, springs and engine management compatibility. Performance preparation part, with no claimed power gain or road approval. Manufacturer information for original springs and components does not replace mechanical checks. Image for reference only; no additional accessories are specified.
Additional profile C, Sport use for the R5 Turbo / Maxi Turbo 840.730 engine. Original valve spring information is not provided by the manufacturer: have the springs, timing and clearances validated on the engine before ordering. No additional valve train accessories are stated as included.
| Profile | Duration at 0.1 mm intake / exhaust | Duration at 1 mm intake / exhaust | Valve lift intake / exhaust | Lift at TDC intake / exhaust |
|---|---|---|---|---|
| Profile C | 270 / 270° | 227 / 227° | 9.60 / 9.60 mm | 1.70 / 1.70 mm |
-
Brand
-
ReferenceSASAC0003-A
-
VehiclesRenault R5 Turbo / Maxi Turbo 840.730