MOTUL 8100 X-MAX 0W30 1L engine oil

MOTUL 8100 X-MAX 0W30 1L engine oil

Discover the advanced MOTUL 8100 X-MAX 0W30 lubricant, designed to meet the needs of modern, powerful vehicles. This 100% synthetic product uses Full SAPS technology (Sulphated Ash, Phosphorus and Sulphur) to provide optimum protection for large-capacity engines, whether petrol or diesel, with direct or indirect injection, and with or without a turbocharger.

Thanks to its many manufacturer approvals, this versatile oil is ideal for cars under warranty. MOTUL 8100 X-max 0W-30 fully meets the performance and durability requirements set by manufacturers while complying with international ACEA and API standards.

The ACEA A3/B4 standard requires excellent detergent/dispersant performance, ensuring increased resistance to viscosity increases caused by deposits, as well as superior protection against wear and high temperatures. This results in better oil consumption control and optimum engine protection throughout the oil change interval.

With its SAE 0W-30 viscosity grade, this oil reduces hydrodynamic friction, promoting fuel savings, particularly when cold. It improves oil circulation from start-up, ensures rapid pressure build-up and allows the engine to reach its operating temperature more quickly.

Environmentally friendly, this oil helps reduce fuel consumption and greenhouse gas emissions (CO2). The MOTUL 8100 X-max 0W-30 formulation represents the ideal balance between fuel economy at low temperatures and engine protection at high temperatures (HTHS > 3.5 mPa.s).

Standards:

• STANDARDS ACEA A3/B4
• API PERFORMANCE SL
• APPROVALS MERCEDES-BENZ MB-Approval 229.5
• VOLVO VCC 95200356
• PERFORMANCE VW 502 00 505 00

Properties:

• Viscosity grade SAE J 300 0W-30
• Density at 20°C ASTM D1298: 0.841
• Viscosity at 40°C (104°F) ASTM D445: 67.3 mm²/s
• Viscosity at 100°C (212°F) ASTM D445: 12.0 mm²/s
• HTHS viscosity at 150°C (302°F) ASTM D4741: 3.5 mPa.s
• Viscosity index ASTM D2270: 175.0
• Pour point ASTM D97: -51.0°C / -60.0°F
• Sulphated ash ASTM D874: 1.10% by mass
• TBN ASTM D2896: 10.1 mg KOH/g
• Flash point ASTM D92: 224.0°C / 435.0°F