MOTUL NGEN HYBRID 0W20 1L engine oil

MOTUL NGEN HYBRID 0W20 1L engine oil

Discover MOTUL’s bio-based synthetic “Fuel Economy” engine lubricant, specially designed for hybrid electric vehicles (H.E.V Hybrid Electric Vehicle) and plug-in hybrids (P.H.E.V Plug-in Hybrid Electric Vehicle) with recent petrol engines, whether turbocharged or naturally aspirated, with direct or indirect injection. This product is optimised for engines using low-friction SAE 0W-20 oils with very low HTHS (High Temperature High Shear) viscosity ≥ 2.6 mPa.s.

The MOTUL NGEN HYBRID 0W-20 formula is developed to meet the technical challenges of petrol hybrid cars, such as fuel dilution, water emulsion, frequent stop/start cycles and lower oil temperature conditions. With an advanced technological approach, this oil forms part of a sustainable concept by incorporating 25% organic base oil (synthetic oil made from 100% renewable plants) and is packaged in a Motul container made of 50% recycled plastic and 100% recyclable. Organic base oils, using renewable non-fossil materials, reduce environmental impact and enable Motul to cut its carbon footprint by 25% during manufacturing.

MOTUL NGEN is the term for Motul’s sustainable ranges, using various technologies in their formulations and packaging to reduce their carbon footprint. This dedicated oil may also suit petrol engines requiring an SAE 0W-20 lubricant or a viscosity 20 “Fuel Economy” lubricant meeting API SP and/or ILSAC GF 6A standards. MOTUL NGEN HYBRID 0W-20 is also suitable for BEV (Battery Electric Vehicle) electric vehicles equipped with a petrol combustion engine acting as a range extender (Range Extender).

Standards: API SERVICE SP, ILSAC GF-6A

Recommended for: HONDA Hybrid, NISSAN Hybrid, and TOYOTA Hybrid

Properties:

• SAE J 300 0W-20 viscosity grade
• Density at 20°C (68°F) ASTM D1298: 0.841
• Viscosity at 40°C (104°F) ASTM D445: 46.8 mm²/s
• Viscosity at 100°C (212°F) ASTM D445: 8.7 mm²/s
• HTHS viscosity at 150°C (302°F) ASTM D4741: 2.7 mPa.s
• Viscosity index ASTM D2270: 166
• Pour point ASTM D97 : -42°C / -44°F
• Flash point ASTM D92: 232°C / 450°F
• Sulphated ash ASTM D874 : 0.72% mass
• TBN ASTM D2896: 7.2 mg KOH/g